网络通信-mini型便携Android通讯设备

接口:通讯设备
算法:Android

mini型便携通讯设备概述:

        该设计介绍的是搭接Android设备与外围硬件之间通讯的转换工具,也叫"IOIO"。比如外部传感器和伺服系统等硬件之间的通信。与其他的Android通信不一样的是,可以采用该便携设备自带的java库文件,就可以完成Android应用程序代码。不需要额外的Arduino草图!这大大简化了过程,您只需要关注你的Android应用程序代码。

        除了基本的数字输入/输出和模拟输入,该搭接设备还处理PWM,I2C、SPI和UART控制。通过Android手机APP,就可以很容易升级的固件。

FoS4jZaXHf9xeFRwwkgHGlXAW6OC.pngFhkZkYqUpxgR__M1diOI_3UvKOys.jpg

  • 46 total I/O pins * - featuring both open-drain, and internal pull up/down, some pins are 5V tolerant

  • USB Bluetooth dongle, this particular dongle has been found to be the most compatible with Android devices. See verified devices with this dongle.

  • On-board LiPO charger circuit. The LiPO is re-chargeable using any USB power source.

  • Included 400 mAh LiPO battery (under the PCB)

  • LED indicators for charging and full battery states

  • On-board on/off switch

  • Female header pins

  • 16 analog inputs (10-bit)

  • 9 PWM outputs

  • 9 pulse inputs

  • 4 UART channels

  • 3 SPI channels

  • 3 TWI (I²C-compatible) channels

  • In addition to the headers, 19 of the IOIO pins are also exposed via solder pads for applications where sturdy/permanent connections are needed.

  • On-board programmable LED (IOIO "status" LED)

  • Maximum 800mA load output

  • Solder pad for an optional alcohol sensor

说明:

      很有可能你的Android设备兼容该通讯设备,但我们不能绝对肯定每个Android设备制造商可以修改Android构建。几乎所有的设备将与MicroUSB电缆,但并不是所有将与蓝牙连接,请检查一下!

FnUvHESXQsyx8vzj68V6EP3SjAhx.png

相关文件

  • hardware.zip 大小:415.77 k 下载
  • 驱动 开发功能.zip 大小:25.40 k 下载
  • 相关技术文件.zip 大小:0.19 k 下载
版权归天空下的眼泪所有举报